JHS Pedals &#8211; 3 Series Tape Delay

Click here to view more products

SKU: JHS-3STAPEDELAY Category: Delay Tag: JHS Pedals

Description

Tape Delay

Tape delay was invented in the late 40s when Les Paul strung two Ampex Model 200A reel-to-reel tape recorders together. A little later, in 1953, Ray Butts invented the Echosonic, the first actual tape delay unit. This would be followed up by the Echoplex EP-1 in 1961 from Mike Battle and the Space Echo from Roland in 1974. The JHS Pedals 3 Series Tape Delay is a simplified and faithful throwback to these classic units. The Mix control lets you control how much clean signal is blended in with the wet (delayed) signal (on the original unit, this was called Echo Volume). Tape Speed acts as a simulation of the RE-201’s tape motor speeding up and slowing down and determines how short or long the delay effect is. The Repeats control goes from a single repeat to many, reminiscent of a sound being written onto the tape loop with loss of fidelity each time. Finally, when the Flutter toggle is turned on (up position), it replicates the wear & tear to the mechanical parts of a tape machine that happens over time. This causes mild modulation, warble, and flutter sounds in the echo path of the delay that so many players desire.

CONTROLS

MIX – Controls how much clean signal is blended in with the wet (delayed) signal. Left is more dry signal. Right is more wet signal.

TAPE SPEED – Controls the length of delay effect from 15ms to 950ms.

REPEATS – Controls how many repeats occur after you play. Left is less. Right is more.

FLUTTER – Switch down is standard effect. Switch up introduces a mild modulation reminiscent of vintage units with mechanical wear.

JACKS

INPUT – ¼” jack on the right side of the pedal.

OUTPUT – ¼” jack on the left side of the pedal.

POWER – Requires 9VDC negative center power and consumes 65mA. Do not use more than 9VDC. You will void your warranty.

THIS PEDAL REQUIRES STANDARD 9VDC NEGATIVE POWER, CONSUMES 65mA, AND MEASURES 4.42” X 2.38” X 1.22”

About JHS Pedals

ABOUT JHS Pedals

JHS Pedals was founded by Joshua Heath Scott in Jackson, Mississippi. He began by repairing and modifying his own pedals, and then sold modified pedals at the local guitar shop before designing his own. Among his early models were the Morning Glory overdrive and the Pulp 'N' Peel compressor. In 2009 Scott moved the company to Kansas City, Missouri, eventually expanding to 10 employees. JHS released the Panther analog delay in 2011 and also the SuperBolt overdrive and Prestige booster/buffer/enhancer in 2012.

In 2015 JHS collaborated with Keeley Electronics to produce a combined compressor and overdrive pedal, the Steak and Eggs.

2018 brings Scott and Nick Loux to release the first episode of The JHS Show, a video blog about guitar pedal history, products and inventors; Scott's screen persona has been described as "the Bill Nye the Science Guy meets Mister Rogers of guitar".

JHS Pedals best sellers

JHS Pedals - Colour Box V2 10th Anniversary Preamp Pedal

JHS Pedals – Colour Box V2 10th Anniversary Preamp Pedal

$645.00

The Colour Box is ten years old, and to celebrate, we're offering a special colorway in a pro-audio aesthetic! Get them while they're hot, because we're only planning on selling these from now until December 31, 2024. -JHS

JHS Pedals – Morning Glory V4 Overdrive

$285.00

The Morning Glory is undoubtedly our most well-known overdrive pedal, winning more awards and receiving more accolades than any of our other designs. We worked hard to make it one of the most transparent overdrives out there. When you want to add some mid- to low-level grit to your crystal-clean tone, use the Morning Glory. When you want to boost a crunchy tone into thicker sustain, use the Morning Glory. When you need to add tube-like touch response to a less-than-ideal amp, use the Morning Glory. When you need to switch between two gain levels on the fly...Yeah, you get the idea.

JHS Pedals – Sweat Tea V3 Overdrive / Distortion

$432.00

The Sweet Tea V3 is our "Everything Medium-to-High gain 2-in-1” and it covers all the bases from light breakup, blues, rock, heavy grind, and more.

The Sweet Tea V3 is for anyone who wants a versatile overdrive/distortion that covers all the bases you need plus more. You’ll find medium-to-high gain tones and the ability to stack for the perfect face-melting sounds.

JHS Pedals – 3 Series Reverb

$145.00

Size (L x W x H): 4.42" x 2.38" x 1.22"

JHS Pedals – 3 Series Chorus

$145.00

Size (L x W x H): 4.42" x 2.38" x 1.22"

JHS Pedals – TIDEWATER – TREMOLO

$195.00

Have you ever ridden the sonic waves of a vintage Fender blackface or Vox tremolo flowing like water from the speaker? Then you know that this kind of tone can make you feel like you’re sailing on a million dollar yacht. The Tidewater tremolo faithfully recreates this beloved amp tremolo with a warmth and character you would only expect from a vintage amp. With simple controls and a small footprint, you’ll be sailing the high seas of tone with the Tidewater tremolo.

JHS Pedals – PACKRAT – Distortion

$359.00

In 1978, the most versatile and influential distortion pedal of all time was invented in Kalamazoo, MI: the Proco RAT. Scott Burnham and Steve Kiraly first had the idea after playing, repairing and modifying all the available distortion pedals on the market. They wanted something that didn’t exist in the mainstream product lines like MXR, DOD and BOSS. They wanted a pedal that could go from overdrive to distortion and then all the way to fuzz. By 1979 Scott had perfected the circuit in his RAT-infested basement workshop, and the rest is history.

JHS Pedals Emperor V2 – Chorus/Vibrato

$315.00

In 2014 we brought you the Emperor V1, a 100% Analog Chorus/Vibrato with Tap Tempo. Now in 2018 we are proud to bring you the Emperor V2! There are two ways to look at the JHS Pedals Emperor Analog Chorus/Vibrato pedal. The Emperor V2 is a vintage-correct effect that absolutely nails the hard-to-find sound of the Arion SCH-1...but its also a do-it-all modulation solution whether you want a subtle sheen, convincing rotary simulation, or seasick vibrato. It utilizes a Bucket Brigade 3207 chipset to deliver the warmth of ‘80s-style analog chorus pedals and we've added enough onboard and outboard control to put you in command of every aspect of the Emperor’s voice. Whether spreading its warm tones or icy sheen to a pristine-sounding stereo rig... or utilizing an external expression pedal to cop realistic rotary speaker sounds on a blues gig, the Emperor can do it all.

JHS Pedals – BONSAI 9-way Screamer

$359.00

In the late 1970's the overdrive pedal was arguably perfected when Japanese engineers designed the sound that we now know as the heart and soul of so many of our favorite artists, recordings and sounds. Players ranging from The Edge, Trey Anastasio, Buddy Guy, Kirk Hammett, John Mayer, SRV, Carlos Santana and thousands more from every possible genre have utilized and depended on this classic iconic green box. If a single effect pedal was chosen to board a Voyager 3 mission and be solely responsible for showing the universe the sound of overdrive, it would undoubtably be Tube Screamer. It is probably the most produced and sold pedal in the history of guitar pedals! The Bonsai is our tribute to one of the greatest pedals ever created.

JHS Pedals “SPRING TANK REVERB”

$224.00

Spring has come and we here at JHS bring you the washed out layers that only true amp style spring reverb can give you in the Spring Tank. This compact reverb pedal brings you an arsenal of settings to tweak, yet with utilitarian simplicity and usability. The Spring Tank gives you the ability to create the perfect spring reverb for your sound with controls for Depth, Length, Highs, Boost (to control your overall volume), and two independent and switchable reverb mixes called Tank 1 and Tank 2. The Depth controls the size of the room, while Length controls how long the reverb reverberates. Highs gives you the ability to control the tone of the reverb by adding or subtracting high frequencies. Tank 1 acts as your main reverb mix control, while Tank 2 is your secondary mix control engaged by the Tank 2 switch. So you have two reverb mix options on the fly! We’ve also added a Boost control so you can regain any perceived volume loss from the reverb. Dial in the perfect reverb with Depth and Length controls. Set your primary reverb mix with the Tank 1 control. Set your secondary reverb mix with the Tank 2 control and switch it on the fly with the Tank 2 switch. Set the reverb tone with the highs control. Boost your overall volume with the Boost control. The Spring Tank has an effects loop so you can put any effect on the reverb tails only. This gives you the ability to create amazing soundscapes with different effects. Just plug in a TRS splitter cable into the effects loop jack and insert any pedal into the loop and you're set. There is also an internal switch to choose to have the effects loop on only when Tank 2 is engaged or on all the time. With options a plenty and easy to use controls, blast your signal into the stratosphere with the Spring Tank!

JHS Pedals – MUFFULETTA Distortion / Fuzz

$359.00

The Big Muff fuzz has been around so long, been on so many classic recordings, and been through so many variations that every guitarist out there has a favorite version of its iconic tone. JHS wanted to pay tribute to that undeniably classic fuzz pedal, but we couldn’t come to a consensus about which Muff was king. With the Muffuletta, our indecision is your gain. We crammed five all-analog re-creations of the pedal’s most beloved tones into this box. We even threw in a JHS-exclusive tone that is our take on the historic stomp. No matter what Big Muff era you prefer, you can get ‘em all in the JHS Muffuletta fuzz pedal.

JHS Pedals “ANGRY CHARLIE V3”

$285.00

From Jhs: The Angry Charlie has become a staple of the JHS line over the years, and it’s a force to be reckoned with in the high-gain pedal territory. Its ability to convincingly and accurately breathe JCM800 tones into any rig has made it a popular choice for guitarists of all genres. And unlike many other British amp-in-a-box pedals, the Angry Charlie V3 sports a 3-band tone stack, just like the Marshalls, helping nail those warm yet searing tones and boundless sustain. If you are a glutton for high-gain overdrive/distortion that has a British flavor, the Angry Charlie V3 will change your life. Well, your gear life. Furious-sounding amp in a box Turn the Drive control down, and you might be surprised how bluesy and vintage-like this pedal sounds. But through its different versions, our Angry Charlie distortion has always been one of the more aggressive British amp-in-a-box pedals out there. Either way, you’ll be injecting your amp with the grit and attitude of the UK amplifier heads that gave rock ‘n’ roll its teeth. Turns any amp into a screaming Marshall stack Go from bluesy Hendrix-like breakup to high-gain Brit tones with a twist of the Drive knob Drive and Volume control interact the same as a master volume amp head Back off your guitar’s volume to control your gain levels without losing clarity Marshall-style tone stack After a couple of extremely well-received versions of the Angry Charlie, we realized that to really nail the ultimate Marshall-style tone, we had to add Marshall-style control. So we gave you a finely tuned Marshall-style 3-band EQ. Enjoy! Fine-tune your tone with controls for Bass, Middle, and Treble Active controls boost and cut their selected frequencies