EarthQuaker Devices – Data Corrupter Modulated Monophonic Harmonizing PLL

$339.00

-

Availability
Brand

In stock

SKU: EQD-DATACORRUPT Category: Tag:
Description

Modulated Monophonic Harmonizing PLL

The Data Corrupter is a monophonic analog harmonizing PLL with modulation. It takes your input signal and brutally amplifies it into a crushing square wave fuzz tone that is then multiplied, divided and modulated to create a wild, yet repeatable, three-voice guitar synthesizer.

The Master Oscillator is the central nervous system at the heart of the Data Corrupter’s cyberpunk hive mind. The three-position switch on the Master Oscillator control panel labeled Root feeds your input to the Data Corrupters signal harvester in its original octave (Unison), one octave down (-1) or two octaves down (-2). Use the Master Oscillator’s Root switch to fine tune the Data Corrupters tracking response for maximum compatibility with your preferred instrument and frequency register. Once you’ve chosen your input octave, the Data Corrupter will perform its calculations and spit out a synthesized frequency, the octave and/or interval of which may be selected via the Master Oscillators eight-position rotary switch. The Voice Mixer’s Oscillator control adjusts the Master Oscillator blend.

The Frequency Modulator applies pitch-bend modulation to the Master Oscillator. In Glide mode, you’ll hear a smooth portamento as each note slides into the next. In Vibrato mode the pitch modulates up and down for a retro sci-fi laser effect.

The Subharmonic assimilates the input signal into one of eight lower octave programs between one and three octaves below the original. For a more stable lower octave, set the Subharmonic’s Root switch to the Unison position, which divides the Square Wave input signal, and removes the Frequency Modulator from the Subharmonic signal path. To unleash the cracked machine lurking within the Data Corrupter mainframe, set the Subharmonic Root switch to Oscillator and try not to look away as the sonic malware you just installed mangles your input signal into the sum and difference of both the Master Oscillator and Subharmonic with the Frequency Modulator applied to the upper and lower octaves. If you think you’re brave enough, set the Subharmonic Root switch to Oscillator and try experimenting with different Master Oscillator and Subharmonic programs to wind up the doomsday clock and inch ever closer to the Singularity. Adjust the Voice Mixers Subharmonic control to set the lower octave volume.

Finally, (or is it?) the Square control located top-left on the Voice Mixer blends in a fuzzed-out square-wave take of your input in its original octave. That’s it.

Design Notes
This Device takes its inspiration from the Electrax Synthax and the Basic Frequency Synthesizer by Ray Marston. Neither of these were really intended to be guitar effect pedals and a lot of work went into creating the Data Corrupter to provide excellent tracking and long sustain. We think you’ll find it more expressive and accurate than pretty much any other PLL based effect pedal around.

About EarthQuaker Devices
EarthQuaker Devices Logo

About EarthQuaker Devices

We inspire a lifetime of musical adventures for all sonic explorers.

Do you like effects pedals? We do! Here at EarthQuaker Devices, we like pedals so much that we make them one-at-a-time, by hand, the hard way, in the idyllic post-apocalyptic wasteland metropolis of Akron, Ohio, USA - where the soldering smoke blocks out the sun, and the fiery Cuyahoga River pumps white-hot liquid magma into the steam engine that powers our great riff factory in the sky.

PHILOSOPHY

We believe that effects pedals and synth modules should be simple and user-friendly, with lots of practical, useable, and musical sounds, but should also be a launchpad for sonic exploration and aural innovation. Most of all, they should always work correctly all of the time, which is why each and every single EarthQuaker Devices pedal is hand built, hand tested, and guaranteed for life. We use only the highest quality components, but if for some crazy reason your pedal does break, send it back to us and we will fix it for you!

Shipping

FREE SHIPPING ON MOST PRODUCTS OVER $100

We offer free shipping on most products of $ 100.00 and over with a dimensional weight under 35 pounds.

For orders over $100 with no weight overload or fuel overload, after checking the best delivery options, we could refund you part of shipping fees.

Free shipping is not valid for remote regions such as Nunavut, Yukon, Northwest Territories and the non-metropolitan regions and all other areas driven by our courier. (Purolator / FedEx / UPS). All items will be shipped uninsured via Purolator or Canada Post. Insurance can be added, please just call us to know the details.  It is also possible to deliver order by bus for Quebec resident. Please contact us to get more information about this option.

In store pick up

  • To pick up your order in store, please write it down in the additional information. Specify the store of your choice. (Laval or Montreal)
  • When your order is ready, we will notify you.
  • You can then come to the selected store to pick up your order by presenting the credit card used for the transaction and a valid Photo ID card showing the billing address that appears on your order.
SPECIFICATIONS
Dimensions5.65″ X 4.65″ X 2.25″ With Knobs
PowerThe Data Corrupter Should Be Powered By A Standard 9-Volt Dc Power Supply With A 2.1Mm Negative  Center Barrel (Not Included)
Current Draw25Ma
Input Impedance1M
Output Impedance1K
SwitchingThis Device Is True Bypass And Uses Electronic Relay Based Switching. Audio Will Not Pass Without Power.