STAGEPAS 600BT
Type: Powered mixer with 2 passive speakers
Mixing capability
Mixing channels: 10
Input channel functions: Hi-Z switch: CH4, ST/MONO switch: CH5/6-9/10
Output channel functions: Feedback suppressor, 1-Knob Master EQ™
I/O
Inputs: 4 mono mic / line + 6 mono / 3 stereo line
Phantom power: +30V (CH1, 2)
Outputs: SPEAKERS OUT (L, R), MONITOR OUT (L/MONO, R), SUBWOOFER OUT (MONO) with auto HPF
Bluetooth: Bluetooth Ver.4.1, A2DP v1.2, Maximum Range: Approx. 10 m
Control and others: Reverb foot switch
Input Channel Function
Hi-Z: CH4
EQ HIGH: HIGH Shelving: 8 kHz
EQ LOW: LOW Shelving: 100 Hz
EQ MID: MID peaking: 2.5 kHz
On-board processors : DSP: SPX digital reverb (4 program, parameter control)
On-board amplifiers: Maximum output power @4ohms: 680W (340 W + 340 W) (Dynamic), 560W (280W + 280W) (Continuous)
General specifications
Speaker type: Two-way bass-relfex speakers
Frequency range (-10dB): 55 Hz – 20 kHz
Nominal coverage
H: 90°
V: 60°
Floor Monitor Angle: 50°
Components
LF: 10" (25 cm) cone
HF: 1.4" (3.56 cm) voice coil compression driver
Maximum output level (1m; on axis): 129 dB SPL / speaker
Power requirements: 100 V – 240 V 50 Hz/60 Hz
Power consumption: 35 W (Idle), 100 W (1/8 Power)
Pole socket: 34.8-35.2 mm pole socket with StageLok™
Accessories: Cover panel, Power cord (2m), 2 x Speaker cables (6m), 12 x Non-skid pads, 2 x Ferrite Cores, 2 x Cable ties
Options: Yamaha BMS10A (mic stand adaptor) for mixer mount, FC5 (foot switch) for reverb ON/OFF
Others: Handle: 1 x Top
Dimensions (L × H × P): Speaker 335 x 545 x 319 mm, Mixer 348 x 197 x 135 mm
Poids: 25.6 kg (56.4 lbs) (2 x Speaker 10.9 kg + Mixer 3.8 kg)