Description
STAGEPAS 400BT
Type: Powered mixer with 2 passive speakers
Mixing capability
Mixing channels: 8
Input channel functions: Hi-Z switch: CH4, ST/MONO switch: CH5/6-7/8
Output channel functions: Feedback suppressor, 1-Knob Master EQ™
I/O
Inputs: 4 mono mic / line + 4 mono / 2 stereo line
Phantom power: +30V (CH1, 2)
Outputs: SPEAKERS OUT (L, R), MONITOR OUT (L/MONO, R), SUBWOOFER OUT (MONO) with auto HPF
Bluetooth: Bluetooth Ver.4.1, A2DP v1.2, Maximum Range: Approx. 10 m
Control and others: Reverb foot switch
Input Channel Function
Hi-Z: CH4
EQ HIGH: HIGH Shelving: 8 kHz
EQ LOW: LOW Shelving: 100 Hz
EQ MID: –
On-board processors: DSP: SPX digital reverb (4 program, parameter control)
On-board amplifiers: Maximum output power @4ohms: 400W (200 W + 200 W) (Dynamic), 360W (180W + 180W) (Continuous)
General specifications
Speaker type: Two-way bass-relfex speakers
Frequency range (-10dB): 55 Hz – 20 kHz
Nominal coverage
H: 90°
V: 60°
Floor Monitor Angle: 50°
Components
LF: 8" (20 cm) cone
HF: 1" (2.54 cm) voice coil compression driver
Maximum output level (1m; on axis): 125 dB SPL / speaker
Power requirements: 100 V – 240 V 50 Hz/60 Hz
Power consumption: 30 W (Idle), 70 W (1/8 Power)
Pole socket: 34.8-35.2 mm pole socket with StageLok™
Accessories: Cover panel, Power cord (2m), 2 x Speaker cables (6m), 12 x Non-skid pads, 2 x Ferrite Cores, 2 x Cable ties
Options: Yamaha BMS10A (mic stand adaptor) for mixer mount, FC5 (foot switch) for reverb ON/OFF
Others: Handle: 1 x Top
Dimensions (L × H × P): Speaker 289 x 472 x 275 mm, Mixer 308 x 180 x 116 mm
Poids: 18.3 kg (40.3 lbs) (2 x Speaker 7.7kg + Mixer 2.9kg)