PUNCH IT IN
Punch in your harmonies on the dedicated footswitch. Then, punch them out again – reverb and tone are maintained throughout. Or, set it up so that harmonies are only on when the switch is depressed – perfect for short phrases. Want to talk to the audience? Press & hold to speak without reverb.
Gain even more control over your harmonies with VoiceSupport. VoiceSupport gives you new FX presets, new firmware updates, and maintains your personal database of presets. All you need is a Mac or Windows computer with a USB input.
EASY TO HOOK UP
If you’ve ever connected a mic to your PA, you’re ready to connect Harmony Singer:
Mic > Harmony Singer and Harmony Singer > PA – that’s it.
Your guitar connects the same way you’d connect your other stomp box effects, only it likes to be first in the chain.
Choice of 8 arrangements of Harmony voices: above and below, close and far
Room, Club and Hall reverb choices
Separate mix level control of Harmony voices
Transparent Thru connection to guitar amp
Battery operation (batteries optional)
Ground Lift removes hum when needed
Clean, clear, low noise mic preamp with phantom power
Reverb and Tone can remain on whether Harmony is on or off so you always sound great
Mic Control™ allows remote Harmony on/off using the switch on the Sennheiser e 835 FX or TC-Helicon MP-75 mic
Compact, easy to use
Rugged all-metal construction
USB connection to free VoiceSupport application for easy firmware updates, product-specific news and more.
9V operation (vs 12V) to accommodate common pedalboard power supplies
Automatic input gain – no more setting and adjusting input gain
MORE MIC, MORE CONTROL
Control your harmony anywhere on stage from a mic engineered for the sonic realities of modern vocal performance. Add the TC-Helicon MP-75, or the Sennheiser e835 FX.
8 different Harmony voice presets
Harmony level control
3 Reverb types with adjustable level
Adaptive Tone on/off
Mic Control on/off
Mic input gain level
Height: 5.4 inches (140 mm)
Width: 3.5 inches (90 mm)
Depth: 2.3 inches (60 mm)
Weight: 0.92 lb. (0.42 kg)
Two-part die cast metal
Rubber adhesive feet
Mic In to Out: Input Connector: XLR female, balanced, Input Impedance: 3k1 Ohm, Input Clip Sensitivity: -1 dBu, SNR A-Weighted: >114 dB, Phantom Power: 24V (always on), Output Connector: XLR male, impedance balanced, pin 2 hot, Output impedance: 200 Ohm, Output Full Scale Level: +7.5 dBu, Input to Output Frequency Response: +0/-0.3 dB, 20 Hz to 20 kHz
Guitar In to Out: Guitar Input impedance: 1 MOhm, Guitar Input Level @ 0 dBFS: -7 dBU to 17 dBu, Dynamic Range: >117 dB, 20 Hz to 20 kHz
SAFETY AND REGULATIONS
Power Supply (Not Included): 9V 670mA
Power Consumption: 6W
EMC – Complies with EN 55103-1 and EN 55103-2 FCC part 15, Class B, CISPR 22, Class B
Safety – certified to IEC 65, EN 60065, UL6500 and CSA IEC 65, EN 60065, UL6500 and CSA
Operating Temperature: 32°F to 122°F (0°C to 50°C)
Storage Temperature: -22°F to 167°F (-30°C to 70°C)
Humidity: Max. 90 % non-condensing