Showing all 3 results

Show sidebar
-33%
Close

Laney CUB212R

$1,259.95 $849.99
SPECIFICATIONS Power: 15W to Tubes: three 12AX7 (preamp); two EL84 (power amp) Single channel Two inputs: high and low Controls: Gain, treble, middle, bass and volume Speakers: 2x12” custom HH driver Effects: built-in reverb Open-back design Top-mount grab handle Extension speaker socket Ouptuts: 8, 16 ohm connections
-33%
Close

Laney Ironheart IRT30-112 Combo

$1,899.95 $1,279.99
IRONHEART - IRT30-112   The IRT30-112 Features the same channel and tube compliment as the bigger IRONHEART models and growls with 30 Watts RMS of monster CLEAN, RHYTHM & LEAD tones.   ORIGIN OF TONE   Sometimes where things come is very important! Take for example the IRT30-112’s fully balanced and selectable (dry guitar/amped) DI. It takes its source AFTER the output section – with cabinet emulation.   This means you get your whole tone at the DI, a feature only previously available on super high-end, custom built guitar rigs or the IRT30-112’s cousin, the IRT-STUDIO!   THE NEW IRT30-112 – AGGRESSIVELY TONEFUL.
-33%
Close

Laney Cub12R

$1,039.95 $699.99
The new CUB12R features great straight ahead vintage valve tone with a splash of high quality reverb. The CUB12R houses a Celestion 12 inch driver and pushes out up to 15 watts RMS of pure vintage valve tone, we say up to 15 watts RMS as it has the option of running at significantly less output but more on that in a moment. Lets take a look at the preamp, this consists of the following controls from right to left - gain, treble, middle, bass, volume, tone and finally reverb. The CUB12R's valve complement consists of 3 x ECC83 valves in the preamp giving you the ability to dial in plenty of gain, and the output section consists of 2 x EL84 output valves, which give you that classic British tonality to the amp when they are pushed hard. The CUB12R features a nifty output trick - if you look at the front panel you'll notice two input sockets, one labelled 15W, the other labelled The CUB12R's rear panel features everything you'll need, additional speaker outs with both 8 & 16 Ohm options, a footswitch socket for switching the reverb and an effects loop. The CUB12R offers a welcome addition to the Laney tube amp range giving everyone the opportunity to experience the sound and feel of a good quality tube amp.